steve_b_wales Posted May 9, 2021 Report Share Posted May 9, 2021 (edited) I have an Anschutz .22LR semi auto, and while using it on the range this morning, the small part that you pull back to recycle the bolt snapped. Can this be replaced? I'm not sure of the model of the rifle, as I cannot find a model number anywhere on it. The serial number is 1437171. It appears to be 'fixed' to the receiver/bolt. Here's a photo of what's broken. Edited May 9, 2021 by steve_b_wales Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 9, 2021 Report Share Posted May 9, 2021 Hi if you look on gun trader its a 520 or 525 model Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 9, 2021 Author Report Share Posted May 9, 2021 13 minutes ago, scarecrow243 said: Hi if you look on gun trader its a 520 or 525 model Thanks. Quote Link to comment Share on other sites More sharing options...
TR1 Posted May 9, 2021 Report Share Posted May 9, 2021 The model should be stamped on the receiver area Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 9, 2021 Author Report Share Posted May 9, 2021 51 minutes ago, TR1 said: The model should be stamped on the receiver area I've checked it all over and can't find anything. I'll check again just to make sure. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 9, 2021 Author Report Share Posted May 9, 2021 53 minutes ago, steve_b_wales said: I've checked it all over and can't find anything. I'll check again just to make sure. Update: Nothing on the receiver or barrel. Quote Link to comment Share on other sites More sharing options...
AULD YIN Posted May 10, 2021 Report Share Posted May 10, 2021 (edited) Steve if its the 520/525 the cocking handle (whats left of it ) should just pull/lever out ,if you have the broken piece a member on here got his brazed together successfully a few years ago . Sold my 525 but found the small user manual (booklet) in my cabinet if its of any use to you its highly unlikely you will get a new replacement part Edited May 10, 2021 by AULD YIN add info Quote Link to comment Share on other sites More sharing options...
spandit Posted May 10, 2021 Report Share Posted May 10, 2021 Sold mine too but I'd made a new cocking handle for it - as @AULD YINsays, it should just pull out but you might have to disassemble the rifle to get the new one in Quote Link to comment Share on other sites More sharing options...
mowdy Posted May 10, 2021 Report Share Posted May 10, 2021 When I had mine and the cocking handle broke I just mig welded a small bolt on to the pin as well. A bolt that fits in to the bolt Aperture would also work for a quick fix? Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 10, 2021 Author Report Share Posted May 10, 2021 (edited) 5 hours ago, AULD YIN said: Steve if its the 520/525 the cocking handle (whats left of it ) should just pull/lever out ,if you have the broken piece a member on here got his brazed together successfully a few years ago . Sold my 525 but found the small user manual (booklet) in my cabinet if its of any use to you its highly unlikely you will get a new replacement part I think it is a 520/525 model. I haven't got the broken bit as it flew off in the field where I was shooting. I'll have the manual if you don't mind. I'll PM you my address. Thanks. 14 minutes ago, mowdy said: When I had mine and the cocking handle broke I just mig welded a small bolt on to the pin as well. A bolt that fits in to the bolt Aperture would also work for a quick fix? IF I can get the remainder out of the hole that it 'slots'? into, I will try and find something to replace it. Edited May 10, 2021 by steve_b_wales Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 10, 2021 Author Report Share Posted May 10, 2021 UPDATE 2 I didn't realise that the 'pin' just pulled out of the receiver, and I believe a replacement would just be a push fit. Is there anyone on here that could braze a section onto the pin that I have please? I'm more that happy to cover any costs incurred. Here's the photo's of the pin. Quote Link to comment Share on other sites More sharing options...
TR1 Posted May 10, 2021 Report Share Posted May 10, 2021 https://southertonguns.com/listing/anschutz-cocking-handle/ would this info help to find a spare Quote Link to comment Share on other sites More sharing options...
Rob85 Posted May 10, 2021 Report Share Posted May 10, 2021 If you cannot braze it I reckon another avenue to explore is to replicate the snapped off part in such a way that you could use the remainder of what you have to form into a pin/bolt and have it fixed to a new part as a two piece assembly. Quote Link to comment Share on other sites More sharing options...
Andy H Posted May 10, 2021 Report Share Posted May 10, 2021 That bolt handle is the hooked one to clear the cartridge deflector , Let me have a look as i might have a spare one hanging around in my box of bit's. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 11, 2021 Report Share Posted May 11, 2021 (edited) helpful folk on here as usual everytime i open up pigeonwatch there always seems to be someone sending someone something FOC making something for someone generally being helpful doing something for someone amazin' isnt it Edited May 11, 2021 by ditchman Quote Link to comment Share on other sites More sharing options...
old man Posted May 11, 2021 Report Share Posted May 11, 2021 13 hours ago, TR1 said: https://southertonguns.com/listing/anschutz-cocking-handle/ would this info help to find a spare A good start, a nice helpful find. Quote Link to comment Share on other sites More sharing options...
wabbitbosher Posted May 11, 2021 Report Share Posted May 11, 2021 Bosher to the rescue 👍🏼 Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted May 11, 2021 Report Share Posted May 11, 2021 Well done Mick. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted May 11, 2021 Author Report Share Posted May 11, 2021 2 hours ago, wabbitbosher said: Bosher to the rescue 👍🏼 I was about to post that the above gentleman has come to my rescue. Thanks to everyone else for their advice etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.