bornfree Posted September 29 Report Share Posted September 29 Just purchased a 694 and the trigger guard is cutting my 2nd finger I've put the trigger in the rearmost position and smoothed the trigger guard edge but it's still happening. Any ideas? Quote Link to comment Share on other sites More sharing options...
harrycatcat1 Posted September 29 Report Share Posted September 29 12 minutes ago, bornfree said: Just purchased a 694 and the trigger guard is cutting my 2nd finger I've put the trigger in the rearmost position and smoothed the trigger guard edge but it's still happening. Any ideas? Would one of these help? I have one for my sxs Quote Link to comment Share on other sites More sharing options...
dipper Posted September 29 Report Share Posted September 29 I had same trouble with my MK 38 fitted a rubber trigger guard Sorted? Quote Link to comment Share on other sites More sharing options...
ditchman Posted September 29 Report Share Posted September 29 brilliant piece of kit.....i never had a problem with my knuckle......but i was advised to use it as an aid for hand placement.............and you know what it worked.. Quote Link to comment Share on other sites More sharing options...
mellors Posted September 30 Report Share Posted September 30 Great idea unfortunately there out of stock. Both my berretas do this with standard steel loads but not home loads obviously more ooomph. Quote Link to comment Share on other sites More sharing options...
harrycatcat1 Posted October 1 Report Share Posted October 1 20 hours ago, mellors said: Great idea unfortunately there out of stock. Both my berretas do this with standard steel loads but not home loads obviously more ooomph. Loads if you Google rubber trigger guard https://www.ebay.co.uk/itm/375664837360?chn=ps&_ul=GB&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=375664837360&targetid=2361039923645&device=m&mktype=pla&googleloc=9046372&poi=&campaignid=21697381820&mkgroupid=170109506289&rlsatarget=pla-2361039923645&abcId=10027101&merchantid=656286869&gad_source=1&gclid=Cj0KCQjwu-63BhC9ARIsAMMTLXQpXSK8d0hOitEh-SAsJN7zydaI9RcGydTmy_8X5EoGH5UIgVrsynEaAuA2EALw_wcB Quote Link to comment Share on other sites More sharing options...
Old Boggy Posted October 1 Report Share Posted October 1 (edited) Yep, that`s what I use on my side by side. Sportarm stock the Bisley one. Edited October 1 by Old Boggy Quote Link to comment Share on other sites More sharing options...
mellors Posted October 1 Report Share Posted October 1 28 minutes ago, harrycatcat1 said: Loads if you Google rubber trigger guard https://www.ebay.co.uk/itm/375664837360?chn=ps&_ul=GB&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=375664837360&targetid=2361039923645&device=m&mktype=pla&googleloc=9046372&poi=&campaignid=21697381820&mkgroupid=170109506289&rlsatarget=pla-2361039923645&abcId=10027101&merchantid=656286869&gad_source=1&gclid=Cj0KCQjwu-63BhC9ARIsAMMTLXQpXSK8d0hOitEh-SAsJN7zydaI9RcGydTmy_8X5EoGH5UIgVrsynEaAuA2EALw_wcB Thank you. Got the last one from bushwear. Quote Link to comment Share on other sites More sharing options...
harrycatcat1 Posted October 1 Report Share Posted October 1 8 hours ago, mellors said: Thank you. Got the last one from bushwear. Think mine was from there too 🤔 Quote Link to comment Share on other sites More sharing options...
mellors Posted October 2 Report Share Posted October 2 On 01/10/2024 at 11:32, mellors said: Thank you. Got the last one from bushwear. Fits perfect on my 20 g. Quote Link to comment Share on other sites More sharing options...
martinj Posted October 2 Report Share Posted October 2 I had the same trouble when my 692 was new, I don't know why as the trigger guard is as smooth as a baby's bottom. For a while I carried plasters to put on if the chafing started but now I don't need them, in fact I had forgotten about it until I saw this thread. I can only assume that my subconscious brain has taken over and keeps my finger out of the way of harm for me. Quote Link to comment Share on other sites More sharing options...
bornfree Posted October 4 Author Report Share Posted October 4 Massive thanks to samboy for sending me a trigger guard free of charge. Quote Link to comment Share on other sites More sharing options...
old'un Posted October 5 Report Share Posted October 5 (edited) On 29/09/2024 at 19:57, bornfree said: Just purchased a 694 and the trigger guard is cutting my 2nd finger I've put the trigger in the rearmost position and smoothed the trigger guard edge but it's still happening. Any ideas? Other things that can cause this are, short LOP, diameter of grip, trigger finger to far round trigger and small hands. A rubber trigger guard may lesson the impact but it does not cure the fault. Edited October 5 by old'un Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted October 5 Report Share Posted October 5 It is just natural selection. Some people are not meant to enjoy Beretta's. Quote Link to comment Share on other sites More sharing options...
old'un Posted October 5 Report Share Posted October 5 4 minutes ago, TIGHTCHOKE said: It is just natural selection. Some people are not meant to enjoy Beretta's. and some people buy better guns Quote Link to comment Share on other sites More sharing options...
bornfree Posted October 5 Author Report Share Posted October 5 3 hours ago, TIGHTCHOKE said: It is just natural selection. Some people are not meant to enjoy Beretta's. I've shot beretta 682s for 25 years never had a problem till this one Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted October 5 Report Share Posted October 5 9 minutes ago, bornfree said: I've shot beretta 682s for 25 years never had a problem till this one I've shot various Beretta's for over 40 years and still have never had the problem. I think the gun is telling you something........................... Quote Link to comment Share on other sites More sharing options...
samboy Posted October 5 Report Share Posted October 5 I've had about 8 Beretta's and the only one i had this issue with was the 695. Someone told me it's the steel they make the barrels out of causes the problem. Sounds a bit strange but you never know. I have a 694 at the mo with no problem. Quote Link to comment Share on other sites More sharing options...
Old Boggy Posted October 6 Report Share Posted October 6 12 hours ago, samboy said: I've had about 8 Beretta's and the only one i had this issue with was the 695. Someone told me it's the steel they make the barrels out of causes the problem. Sounds a bit strange but you never know. I have a 694 at the mo with no problem. As Old’un said a short LOP can cause the problem. Is the stock on your current gun any shorter than previous guns? OB Quote Link to comment Share on other sites More sharing options...
samboy Posted October 6 Report Share Posted October 6 4 hours ago, Old Boggy said: As Old’un said a short LOP can cause the problem. Is the stock on your current gun any shorter than previous guns? OB Can't remember now. But i never tend to measure them. I just pick up a gun and if it feels right i buy it. Quote Link to comment Share on other sites More sharing options...
London Best Posted October 6 Report Share Posted October 6 Surely, once the gun has cut your finger far enough, ie right through, the finger will drop off and the problem is solved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.