Jump to content

rust on gun


mattyg1086
 Share

Recommended Posts

I keep my guns in the loft and they are getting small rust patches and ive trued that vp90 stuff or whatever its called but its not working ive coated them in oil to try and stop any more rust and am thinking about getting a small tube heater to take the chill out of the air and fitting it next to the cabinet. Will this help? Also how much would the rust cost to get fixed and is there anywhere good in bedfordshire?

Link to comment
Share on other sites

Fix the Rust? Cost??

 

Use Parker Hale stuff called "Youngs .303"

OR

Ed's Red

OR

Kroil

...not necessarily in their order of efficiency, more like the ease at which they can be sourced!

 

spread a few drops of one of the above, then allow to soak in.

Give it a few seconds then use extra fine steel or copper wool.

Rub until rust is gone. Repeat as necessary....

 

Did a couple of airguns last week that were in a right state.

One has changed back to almost new condition with less than 30 minutes work...

 

Prevention?

Use a different surface moisture barrier - silicone spray perhaps?

Or wax paste.

THEN - store the guns in a special silicone impregnated full length knitted sock.

Edited by saddler
Link to comment
Share on other sites

put disposable dehumidifier pots in your safes ,youl be surprised ,change mine every 2/3 months water filled every time.The loft heats n cools every day/ .night so condensation is always going to be an issue.pay 3 quid for 5 ,well worth it if you dont have a power supply for a heater atb

Link to comment
Share on other sites

Then let your wife pay for the damage - if my other half was being unreasonable then a few choice words would sort the issue. Other option would be to pop down to your nearest Homebase and buy some Polystyrene tiles and some Decorators Caulking - cut the Tiles to fit and line your cabinet with them. Make sure that your guns are not really cold when you put them away and use something like Napier Gun Cleaner on the metal.

Link to comment
Share on other sites

Simoniz etc and other waxes give some protection but the proper stuff for the job is "Renaissance Wax". It was specifically designed to protect items in long term storage and is used by the NRA in the US and the British Museum. Super stuff and works great if when you take your guns out in t he rain!

 

http://www.picreator.co.uk/articles/3_renaissance_wax.htm

Edited by Wingman
Link to comment
Share on other sites

Matty are all the knives and medicines kept in a locked cabinet in the loft as they can do harm too.

 

Being a paramedic you think she would be a bit more understanding.

 

Cabinet heater is the only way to be sure of keeping your guns in good nick.

Edited by figgy
Link to comment
Share on other sites

Matty are all the knives and medicines kept in a locked cabinet in the loft as they can do harm too.

 

Being a paramedic you think she would be a bit more understanding.

 

Cabinet heater is the only way to be sure of keeping your guns in good nick.

I know mate tell me about it shes coming round though

Link to comment
Share on other sites

I know mate tell me about it shes coming round though

How hard did you have to tell her that she lost consciousness?

Paramedic???!! My experience of the medical professions = biggest self-medicators of alcohol on the planet.

 

And if she is SO concerned that the kids will get access to the guns, make them give you back the spare keys you had cut for them!

 

WIMMIN...!

 

;)

Link to comment
Share on other sites

Taking them out of the loft is not an option im afraid its a condition of the my wife who is a paramedic and is scared one of the kids will get hold of them and hurt or kill themselves

 

Kids can get into a steel box with mortice locks if it's not up a small ladder..... but if it isn't up a small ladder they are bound to get in.....(not sure how her profession is relevant tho)

 

Other option convert the loft into a man cave with proper heating and insulation.

Edited by HDAV
Link to comment
Share on other sites

Other option would be to pop down to your nearest Homebase and buy some Polystyrene tiles and some Decorators Caulking - cut the Tiles to fit and line your cabinet with them.

Insulation should always be on the 'outside' to avoid condensation on the inside.

Link to comment
Share on other sites

I also use Napier and packs of absorbant granules but still re oil and re clean every few months.

 

I think the americans do a 40w heater for the job but this will be 110 volt. I think a 40w light bulb in there would do the same job, perhaps fixed through one side panels of the cabinate,

 

A

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...